JVC Everio GZ-VX755 Detailed User Manual page 59

Unsure of password for the access point
(wireless LAN router).
Unable to connect via Wi-Fi Protected Setup
(WPS).
Outside Monitoring (Connection in the House)
Trouble
Unable to connect to camera.
(URL required)
Unsure of URL to access from a web
browser.
No image and sound when accessing from a
web browser.
Unable to access the entered URL. (cannot
be found)
Unable to access the entered URL.
(password required)
Operations from this unit do not work when
outside monitoring is in use.
Recording stops when the Android / iPhone
application or web browser is closed.
Video or audio is interrupted or delayed
The unit turns off automatically.
Unable to set focus.
Connection gets disconnected, or a
"UNABLE TO CONNECT" message is
displayed
Screen does not refresh or remains black
Refer to the instruction manual of the access point (wireless LAN router) in use.
Simple connection methods other than WPS are not supported. Conduct a search for the access point to
0
connect.
Turn off the power of the camera, then try again.
0
Check whether the Wi-Fi connection is established successfully.
0
Check to ensure that the camera and the terminal (smartphone or computer) are connected to the same
0
access point.
Try again after powering off and on the camera and the terminal (smartphone or computer).
0
After outside monitoring is started, tap "CAMERA NETWORK INFO." shown on the camera's screen.
0
Enter the address as shown in "URL(LAN):" into the web browser to access it.
If you have installed third-party video players, images and sounds may not be played back properly.
0
If the stream format is set to "Motion-JPEG" when transferring to the web browser, no sound will be output
0
from the browser.
If recording of the video is in progress, no sound will be output from the browser.
0
Check that the camera is properly connected to an access point (wireless LAN router). (Q appears on
0
the camera's screen.)
Check that the computer is properly connected to an access point (wireless LAN router). Connection
0
should be possible if it is connected to the internet.
Check that the URL is correct.
0
Enter your username and password.
0
The username is "everio" (fixed) and the default password is "0000" (can be changed).
Operations cannot be performed from this unit when outside monitoring is in use.
0
Operate from the Android / iPhone application or web browser.
When the Android / iPhone application or web browser is closed during recording, the camera gets
0
disconnected and recording stops.
If the network speed is slow, videos and audio sound may be interrupted, or delay may become significant.
0
(For web browser) Lagging may become significant due to the performance of the computer.
0
If the stream format is set to "Full HD", change to "SD" or "Motion-JPEG" and try again.
"Wi-Fi Specifications" (A p. 61)
(For web browser) If lagging is severe, reload the screen regularly.
0
(For smartphone) Try to change the place and time to locate an environment with good signal strength.
0
To prevent the situation of forgetting to turn off the power, this unit will turn off automatically after 10 days
0
of continuous usage.
When not monitoring from a smartphone (or computer), the focus of the camera is fixed.
0
Even when monitoring from a smartphone (or computer), the focus of the camera will be fixed if not
0
operated for more than 3 hours. (Focus works again when the camera is operated.)
Establish connection again at a place with good signal strength. Transmission speed may drop, or
0
connection may fail if the devices are placed too far away from each other, when there are objects in
between, or when microwave ovens or other wireless devices are in use.
If connection cannot be established again, restart the terminal (smartphone or computer).
0
Check if the camera and the access point are properly connected.
0
Images cannot be detected on the terminal (smartphone or computer) if the camera is disconnected from
the access point halfway through.
Action
Using Wi-Fi
59