Playing Back A Disc/Usb Mass Storage Class Device - JVC UX-G48 Instructions Manual

To preset the stations
You can preset 30 FM and 15 AM stations.
1 Tune in to a station you want to preset.
• You can also store the monaural reception mode for
FM preset stations if it is selected.
2 Activate the preset number entry mode.
ENTER/SET
• Finish the following process while the indication on the
display is flashing.
3
Select a preset number for the station you store.
• To select a number, see "How to
DIMMER SLEEP A.STANDBY
select a number" on page 8.
1 2 3
• You can also use the ¡ or 1
3D P/HP S C.VOICE CLOCK/TIMER
4 5 6 button.
ZOOM ANGLE SCAN MODE
7 8 9
RETURN CANCEL VFP
10 0 10
4 Store the station.
ENTER/SET
To tune in to a preset station
1 Select the band (FM or AM).
FM
AM
2 Select the preset number for the station you stored.
• To select a number, see "How to
DIMMER SLEEP A.STANDBY
select a number" on page 8.
1 2 3
• You can also use the ¡ or 1
3D P/HP S C.VOICE CLOCK/TIMER
4 5 6 button.
ZOOM ANGLE SCAN MODE
7 8 9
RETURN CANCEL VFP
10 0 10
9
Remote
ONLY
Remote
ONLY
Playing Back a Disc/USB mass storage
class device
INFO
IMPORTANT: Before playing a disc/file, make sure
of the following...
• Turn on the TV and select an appropriate input mode on
the TV to view the pictures or on-screen displays.
• For disc/file playback, you can change the initial setting
to your preference. See "Setup Menu Operations" on
page 30.
If " " appears on the TV screen when you press a
button, the disc/file cannot perform the operation you
have tried to do.
Main Unit
To insert a disc ONLY
• When using an 8 cm disc, place it on the inner circle of the
disc tray.
To close the disc tray, press 0 again.
• If you press DVD/CD 3, disc tray closes automatically
and playback starts (depending on how the disc is
programmed internally).
To connect a USB mass storage class device
• For connecting a USB mass storage class device, see
page 5.
• Always set volume level to the minimum level when
connecting or disconnecting a USB mass storage class
device.
• To disconnect a USB mass storage class device safely, turn
off the System before disconnecting it.