Optical Digital Out Signals; Operating Jvc's Tvs Using The Remote Control - JVC UX-G48 Instructions Manual

OPTICAL DIGITAL OUT Signals

DIGITAL AUDIO
Playback disc/file
DVD Video
with 48 kHz, 16 bit/20 bit/24 bit
Linear PCM
with 96 kHz, Linear PCM
with Dolby Digital
with DTS
DVD-R/-RW in DVD-VR format
with 48 kHz, 16 bit/20 bit/24 bit
Linear PCM
with Dolby Digital
SVCD/VCD/CD
CD with DTS
MP3/WMA/WAV/MPEG-1/MPEG-2
DivX disc/file
with MP2, MP3
with Dolby Digital
* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the OPTICAL DIGITAL
OUT terminal if the discs are not copy-protected.

Operating JVC's TVs Using the Remote Control

Remote control
TV CH ,
SHIFT
OUTPUT
STREAM/PCM
DTS bitstream
44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
DTS bitstream
TV
TV/VIDEO
TV VOL
+,–
Output Signals
DOLBY DIGITAL/PCM
48 kHz, 16 bit Linear PCM*
48 kHz, 16 bit Linear PCM
Dolby Digital bitstream
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM*
Dolby Digital bitstream
44.1 kHz, 16 bit Linear PCM
32 kHz/44.1 kHz/48 kHz, 16 bit Linear PCM
32 kHz/44.1 kHz/48 kHz, 16 bit Linear PCM
Dolby Digital bitstream
You can use the remote control to operate JVC's TVs.
TV
TV/VIDEO
While holding SHIFT, press...
+
TV VOL ,–
TV CH ,
PCM ONLY
48 kHz, 16 bit Linear PCM
48 kHz, 16 bit Linear PCM
32 kHz/44.1 kHz/48 kHz,
16 bit Linear PCM
Turn on/off TV.
Change the input mode.
Adjust the volume.
Change the channel.
38