Playing Back A Disc/Usb Mass Storage Class Device; Loading A Disc; Connecting A Usb Mass Storage; Class Device - JVC UX-E8DAB Instructions Manual

Playing Back a Disc/USB Mass Storage Class Device

This System can play back following discs and files:
– CD.
– CD-R/CD-RW recorded in audio CD format (CD-DA).
– MP3/WMA files on CD-R/CD-RW recorded in ISO 9660 format.
– MP3/WMA files on a USB mass storage class device.
• When playing back an MP3 or WMA track, MP3 or WMA indicator lights on the display.

Loading a Disc

1
2
3
RESUME Play
When you stop the playback by one of the following
operations, this System stores the beginning of the track
stopped at on the disc or stores the position stopped at
of the file on the USB mass storage class device.
– Pressing 7 once (The RESUME indicator lights up on
the display.)
– Changing the source
– Turning off the System
When you start playback again, playback starts from the
stored position.
To clear the stored position, press 7 while playback is
stopped.
7
Press to open the disc
tray.
• When using an 8 cm
disc, place it on the
inner circle of the disc
tray.
Press to close the disc
tray.

Connecting a USB Mass Storage

Class Device

You can connect a USB mass storage class device such
as a USB flash memory device, MP3 player, or multimedia
card reader, etc. to the System.
Front view
USB cable
(not supplied)
NOTES
• Always set the volume to the minimum level when
connecting or disconnecting a USB mass storage class
device.
• Do not disconnect the USB mass storage class device
when the System is turned on. It may cause malfunction
of both this System and the device.
• The USB mass storage class device is charged through
the USB MEMORY terminal when the System is turned
on and the source is USB.
• Use a USB 2.0 cable of less than 1 m in length.
• You cannot connect a computer to the USB MEMORY
terminal of the System.
• Noise and static electricity may stop the sound of the
USB mass storage class device. In this case, disconnect
and then connect the USB mass storage class device
again after turning off the System.
• Opening the disc tray or disconnecting the USB mass
storage class device also clears the stored position.
• When you clear the stored position and start playback,
playback starts...
– For disc: From the beginning of the first track
– For USB mass storage class device: From the
beginning of the current file
If you disconnect the USB mass storage class device,
connect it again, and start playback, playback starts
from the beginning of the first file.
NOTE
This function does not work in Program Play and
Random Play (see page 9).
USB memory
(not supplied)
or