Table of Contents
Advertisement
Installation
This USB Hub is a plug and play device. Your computer will display the Add New
Hardware Wizard after connecting the hub to your computer. Installation may be
done whether your computer is powered on or off. It is not necessary to restart
your computer after installation.
1) Connect the A-B cable (included in this package) to the Upstream port on the
USB Hub, then connect the other end of the cable to an unused USB port on
your computer.
2) Connect your USB devices to the Downstream ports on the USB Hub.
Self-Powering the Hub:
If additional power is required for connected USB devices, plug the DC power
adapter into the power jack, then plug the power adapter into a wall outlet.
Note:
Please use this USB Hub under Self-Power Mode.
6
Advertisement
Table of Contents
