Link Speed & Power Settings - Trango Systems ATLAS4900 User Manual

Configuration
Link Speed & Power Settings
Users may change the radio's over-the-air data rate and conducted output power using the speed and power
commands. Keep in mind that the lower data rates offer higher receiver sensitivity and higher allowable
conducted RF power. The following table shows the relation between speed settings, receiver sensitivity, and
allowable maximum power settings. The lowest power setting is in –4 dBm.
In this example the user sets the power to 18dBm and the speed to 24 Mbps:
#> power
Execution in progress....
17 dBm (8..17)
Success.
#> speed 24
24 Mbps
Success.
#>
Trango Broadband Wireless — Atlas4900 User Manual Rev. 1.3
Speed Setting
(over-the-air rate) Sensitivity
(Mbps)
6
12
18
24
36
48
54
Receiver Max Power
(dBm)
(dB)
-92 17
-87 17
-85 17
-84 17
-80 17
-75 17
-73 15
page
14