Table of Contents
Advertisement
With cruise control, you can
maintain a speed of about 40 km/h
(25 mph) or more without keeping
your foot on the accelerator. Cruise
control does not work at speeds
below about 40 km/h (25 mph).
Cruise control can be dangerous
where you cannot drive safely at
a steady speed. So, do not use
the cruise control on winding
roads or in heavy traffic.
Cruise control can be dangerous
on slippery roads. On such roads,
fast changes in tire traction can
cause excessive wheel slip, and
you could lose control. Do not use
cruise control on slippery roads.
If your vehicle has the Traction
Control System (TCS) and the
cruise control is on, TCS will begin
to limit wheel spin and the cruise
control automatically turns off . See
. When road conditions
allow you to safely use it again, the
cruise control can be turned
back on.
The cruise control buttons are
located on left side of the steering
wheel.
Press to turn cruise
control on and off. The indicator is lit
when cruise control is on.
Press briefly to make the vehicle
resume to a previously set speed,
or press and hold to accelerate.
Press to set the speed and
activate cruise control or make the
vehicle decelerate.
Press to disengage
cruise control without erasing the
set speed from memory.
The cruise control light on the
instrument panel cluster comes on
after the cruise control has been set
to the desired speed. See
If the cruise button is on when not in
use, it could get bumped and go into
cruise when not desired. Keep the
cruise control switch off when cruise
is not being used.
1. Press the
button to turn the
cruise system on.
2. Get up to the desired speed.
.
Advertisement
Table of Contents
