Parking Brake; Using Abs; Braking In Emergencies - Chevrolet 2013 Impala Owner's Manual

2013 chevrolet impala
Hide thumbs Also See for 2013 Impala:
Table of Contents

Advertisement

suddenly slows or stops. Always
leave enough room up ahead to
stop, even with ABS.
Do not pump the brakes. Just hold
the brake pedal down firmly and let
ABS work. You might hear the ABS
pump or motor operating and feel
the brake pedal pulsate, but this is
normal.
ABS allows the driver to steer and
brake at the same time. In many
emergencies, steering can help
more than even the very best
braking.
The parking brake is located to the
left of the brake pedal, near the
driver door.
To set the parking brake, hold the
brake pedal down, then push down
the parking brake pedal.
To release the parking brake, hold
the brake pedal down and push the
parking brake pedal. When you lift
your foot off the parking brake
pedal, the pedal will follow it to the
released position.
A warning chime will sound and a
brake warning light located on the
instrument panel cluster will come
on, if the parking brake is set, the
ignition is on, and the vehicle speed
is greater than 8 km/h (5 mph).
If you are towing a trailer and
parking on any hill, see
.

Advertisement

Table of Contents
loading

Table of Contents