Table of Contents
Advertisement
5. Turn the two hex nuts
counterclockwise to
remove them.
6. Pull out the taillamp assembly
and disconnect the wiring
harness.
7. Turn the bulb socket
counterclockwise to remove it.
8. Pull the old bulb straight out to
remove it.
9. Push the new bulb straight in
until it clicks to install it.
10. Reverse steps 1 through 7 to
reinstall.
To replace one of these bulbs:
1. Remove the two screws (A) from
the license plate lamp assembly.
2. Pull the lamp assembly down
and turn the bulb socket
counterclockwise and out of the
lamp assembly.
3. Pull the old bulb straight out of
the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to
reinstall the license plate lamp
assembly.
Back-Up
Front Parking/
Turn Signal
License
Plate Lamp
Headlamps
High-Beam
Low-Beam
Sidemarker
Stoplamp,
Taillamp, and
Turn Signal
For replacement bulbs not listed
here, contact your dealer.
921LL
3157NAK
194LL
H9
H11
194LL
3057
Advertisement
Table of Contents
