Table of Contents
Advertisement
5-6
Instruments and Controls
2. Press
until PRESS
CALIBRATE COMPASS
displays.
3. Press
to start the compass
calibration.
4. The DIC will display
CALIBRATING: DRIVE IN
CIRCLES. Drive the vehicle in
tight circles at less than 8 km/h
(5 mph) to complete the
calibration. The DIC will display
CALIBRATION COMPLETE for a
few seconds when the
calibration is complete. The DIC
display will then return to
PRESS
TO CALIBRATE
COMPASS.
Clock
TO
Without Date Display
AM/FM Base Radio with a Single
CD Player
This radio has a
the time.
To set the time:
1. Press the
begins flashing on the display.
Press
a second time and the
minutes begin flashing on the
display.
2. To increase or decrease the
time, do one of the following
while the hours or minutes
are flashing:
Turn the
Press
Press
button for setting
button until the hour
knob.
SEEK or
SEEK.
FWD or
REV.
3. Press the
button again until
the clock display stops flashing
to set the currently displayed
time, or wait five seconds until
the flashing stops and the
current time displayed is
automatically set.
To change the time default setting
from 12 hour to 24 hour, press
the
button until 12H or 24H is
displayed. Once 12H or 24H is
displayed, turn the
knob to the
desired option to select the setting.
Press the
button again to apply
the setting, or let the screen
time out.
With Date Display
Single CD (MP3) Player
This radio has a
button for setting
the time.
To set the time and date:
1. Turn the radio on.
Advertisement
Table of Contents
