Setting Cruise Control; Driver Assistance Systems - Chevrolet MALIBU 2018 Manual

CRUISE CONTROL

SETTING CRUISE CONTROL

On/Off button. The Cruise
1. Press the
Control symbol will illuminate in white on
the instrument cluster.
2. When traveling at the desired speed,
press the SET– button to set the speed.
The symbol will illuminate in green on the
instrument cluster.
ADJUSTING CRUISE CONTROL
RES+ Resume/Accelerate
Press the RES+ button to resume a set speed. When the system is active, press the
button to increase speed.
SET– Set/Coast
When the system is active, press the SET– button to decrease speed.
Cancel
Press to cancel the cruise control without erasing the set speed from memory. Pressing
the brake pedal also will cancel the Cruise Control.
ADAPTIVE CRUISE CONTROL
The system maintains the cruise control set speed and the following gap — the time
between your vehicle and a vehicle detected directly ahead — by accelerating or braking.
Following Gap (Adaptive Cruise Control
Press to select a following gap setting of Far, Medium, Near or Off. This is also the
Forward Collision Alert setting.

DRIVER ASSISTANCE SYSTEMS

REAR VISION CAMERA/REAR CROSS TRAFFIC
ALERT
– When the vehicle is in Reverse, a
F
view directly behind the vehicle is displayed.
As part of the system, Rear Cross Traffic Alert
warns of traffic coming from either direction
by displaying a red alert on the display and
sounding three beeps.
FRONT AND REAR PARKING ASSIST
low-speed parking maneuvers, the system
provides "distance to closest object" information on the Driver Information Center. A
beep sounds when an object is detected and 5 beeps sound when an object is very close.
To turn the Parking Assist system and the Rear Cross Traffic Alert system on or off,
Parking Assist button on the center console.
press the
12
Optional equipment
F
F
/Forward Collision Alert
F
– During
F
See Driving and Operating in your Owner's Manual.
)
F