Table of Contents
Advertisement
2. Press the
button and the
HR, MIN, MM, DD, and YYYY
(hour, minute, month, day,
and year) display.
3. Press the pushbutton located
under any one of the tabs to be
changed.
4. To increase the time or date, do
one of the following:
Press the pushbutton below
the selected tab.
Turn the
knob clockwise.
Press
SEEK.
Press
FWD.
5. To decrease the time or date, do
one of the following:
Turn the
knob counter
clockwise.
Press
SEEK.
Press
REV.
The date does not automatically
display. To see the date press the
button while the radio is on. The
date with display times out after a
few seconds and goes back to the
normal radio and time display.
To change the time default setting
from 12 hour to 24 hour or to
change the date default setting from
month/day/year to day/month/year:
1. Press the
button and then the
pushbutton located under the
forward arrow tab. The time 12H
and 24H, and the date MM/DD/
YYYY (month, day, and year)
and DD/MM/YYYY (day, month,
and year) displays.
2. Press the pushbutton located
under the desired option.
3. Press the
or MENU button
again to apply the selected
default, or let the screen
time out.
Instruments and Controls
Power Outlets
The vehicle has three 12 volt outlets
which can be used to plug in
electrical equipment, such as a
cell phone or MP3 player.
On vehicles with a center console,
one outlet is located inside the
center floor console and two outlets
are located at the front of the
console bin under the instrument
panel.
On vehicles without a center
console, two are located under the
climate controls and another outlet
for the rear seat passengers is at
the rear of the center front seat.
Remove the cover to access and
replace when not in use.
WARNING
Power is always supplied to the
outlets. Do not leave electrical
equipment plugged in when the
5-7
(Continued)
Advertisement
Table of Contents
