Crossover Ignition System Operations - Weber Genesis Silver-B Permamount NG 051701 Owner's Manual

Crossover ® Ignition System Operations
If the Crossover Ignition System fails to ignite the
Front burner, light the Front burner with a match. If the
Front burner lights with a match, then check the
Crossover Ignition System.
Check that both the white(1) and black(2) ignition
wires are attached properly.
(1)
Check that the Crossover Ignition button pushes
the igniter (button) down, and returns to the up
position.
Check to see if the igniter is loose in the frame.
Tighten if necessary; see Step "Install igniter" for
correct procedure.
If the Crossover Ignition System still fails to light,
Contact the Customer Service Representative in your
region using the contact information sheet provided
with your manual.
(2)
34