Crossover Ignition System Operations - Weber Genesis Silver-A Owner's Manual

6) Lift and twist the burner assembly slightly, to separate
the crossover tube(1) from the burners. Remove the
burners from the cooking box.
(1)
7) To reinstall the burners, reverse 3) through 7).
CAUTION: The burner openings(1) must be
positioned properly over the valve orifices(2).
Check proper assembly before fastening manifold in place.
(1)
WARNING: After reinstalling the gas lines, they
should be leak-checked with a soap and water
solution before using the barbecue. (See Step:
"Check for gas leaks.")
Maintenance
(2)
Crossover ® Ignition System Operations
If the Crossover ® ignition system fails to ignite the Left
burner, light the Left burner with a match. If the Left
burner lights with a match, then check the Crossover
ignition system.
• Check that both the white(1) and black(2) ignition
wires are attached properly.
(1)
• Check that the Crossover
the igniter (button) down, and returns to the up
position.
®
If the Crossover ignition system still fails to light,
Contact the Customer Service Representative in your
region using the contact information sheet provided with
your manual.
27
®
(2)
® ignition button pushes