Table of Contents
Advertisement
Step 21
Install the accessory rack
You will need: accessory rack.
Rest the left end of the accessory rack on the base
panel. Figure 33 (a).
Insert the right hooks into the right side frame slots.
Figure 33 (b).
Raise the left end up and slide left hooks into the left
side frame slots. Figure 33.
Left side
frame slots
(a)
Left hooks
Figure 33
Right side
frame
(b)
Step 22
Complete accessory installation
You will need: Warm-Up Basket, warming rack, work
surface, thermometer, right trim piece with tool holder,
and a hammer.
Insert one end of the Weber Warm-Up Basket into the
hole in the right end of the lid and the other end into
the slot in the left end of the lid. Figure 34 (a).
Set the warming rack into the slots at the rear of the
cooking box. Figure 34 (b).
Set the work surface onto the left side rails. Figure
34 (c). Make sure that the tabs on the side of the
table are to the right, next to the cooking box.
Insert the thermometer into its holder. Figure 34 (d).
Push the right trim piece into the frame as shown
34 (e), making sure that the tabs on the underside
of the trim piece are snapped into the slots in the
frame 34 (f).
(b)
(c)
(f)
27
(a)
(d)
(e)
Figure 34
Advertisement
Table of Contents
