Adjusting The Position Of The Projected Image (Lens Shift) - Epson EB-G6750WU User Manual

Installing the Projector
b
Press the [ ][ ] buttons on the remote control or the [
on the control panel to change the test pattern.
Using the remote control
The following image adjustments can be made while the test pattern
is being displayed.
Top Menu Name
Image
Using the control panel
Sub Menu/Items
Color Mode s p.46
Abs. Color Temp.
Advanced
- Gamma * p.49
s
- RGB
- RGBCMY s p.49
Reset
Top Menu Name
] button
Signal
Settings
Extended
* Except for custom settings of gamma
a
To set menu items that cannot be set while the test pattern is
being displayed or to fine-tune the projected image, project an
image from the connected device.
c
Press the [Esc] button to close the test pattern.
Adjusting the Position of the Projected Image
(Lens Shift)
The lens can be shifted to adjust the position of the projected image, for
example, when the projector cannot be installed directly in front of the
screen.
a
Release the lens shift dial lock.
Sub Menu/Items
Auto Setup
Geometric Correction s p.43
Multi-Projection
- Brightness Level
- Edge Blending s p.55
- Multi-screen s p.57
24