Adjusting The Position Of The Image On The Projected Screen; Displaying A Test Pattern - Epson EB-G6750WU User Manual

Installing the Projector

Adjusting the position of the image on the projected screen

You can adjust the position of the image if there are margins between the
edge of the image and the projected screen frame due to the Screen Type
setting.
Example: When the Screen Type is set to 4:3 for EB-G6750WU
You can move the image to the left and right.
a
Press the [Menu] button while projecting.
"Using the Configuration Menu"
s
b
Select Display from Extended.
c
Select Screen Position from Screen.
d
Use the [ ], [ ], [ ], and [ ] buttons to adjust the position of
the image.
You can check the current display position by using the background
test pattern.
p.78
e
Press the [Menu] button to finish making settings.
a
The Screen Position cannot be adjusted in the following situations.
• If the Screen Type is set to 16:10 when using EB-G6750WU/EB-
G6650WU/EB-G6550WU/EB-G6450WU/EB-G6250W/EB-G6050W
• If the Screen Type is set to 4:3 when using EB-G6350/EB-G6150

Displaying a Test Pattern

A test pattern can be displayed to adjust the projection status without
connecting video equipment.
The shape of a test pattern is according to the setting of Screen Type. Set
Screen Type first.
"Screen Settings" p.22
s
a
Press the [Test Pattern] button on the remote control or the [
button on the control panel while projecting.
23
]