Network Menu - Epson EB-G6750WU User Manual

List of Functions
Submenu
HDBaseT (EB- Make settings when the optional HDBaseT Transmitter is
G6750WU only) connected to the HDBaseT port.
Control Communications: When set to On, Ethernet
communication from the HDBaseT port, serial
communication, and control using the wired remote control
connected to the optional HDBaseT Transmitter are all
enabled. (When this is enabled, the projector's LAN port,
RS-232C port, and Remote port are disabled.)
Make settings when projecting from multiple projectors.
Multi-Projection
s "Multi-Projection Function"
Brightness Level (not available for EB-G6450WU): When
the brightness of each lamp differs, set the lamp brightness
level between 1 and 5. This item can be adjusted only when
Power Consumption is set to Normal from the Settings
menu.
Edge Blending: Corrects a border between multiple images
to create a seamless screen.
s "Adjust the Edges of the Images (Edge Blending)"
p.55
Multi-screen: You can adjust the tint and brightness of each
projected image.
s "Adjusting to Match Colors"
Projector ID: Set the ID from 1 to 9.Off indicates that no
ID is set.
s "ID Settings"
Schedule Set- You can set the projector's schedule so that it performs a
tings specific operation at a pre-scheduled time.
s "Scheduling Function"
Language You can set the language for messages and menus.
Function
p.53
p.57
p.28
p.69
Submenu
Reset You can reset all adjustment values for the Extended menu
to their default settings. However, the following items are
not reset.
Screen Type, Screen Position, Projection, Direction, High
Altitude Mode, Remote Control Type, Inv Direction
Button, Startup Source Search, Lens Type, A/V Output,
Monitor Out, Standby Mode, Control Communications,
Multi-screen, Projector ID, and Language
See the following to return all menu items to their default
settings.
s "Reset Menu"
* When User's Logo Protection is set to On in Password Protection, settings
related to user's logo cannot be changed. You can make changes after setting
User's Logo Protection to Off.
s "Managing Users (Password Protection)"

Network Menu

When Network Protection is set to On in Password Protection, a message
is displayed and the network settings cannot be changed. Set Network
Protection to Off and then configure the network.
Function
p.103
p.72
89