Adjusting The Image Position; Adjusting The Horizontal Tilt - Epson EB-G6750WU User Manual

Installing the Projector
c
Correct screen distortion using the distortion ring.
When correcting distortion, the area around the edges of the image
is also focused.
d
Turn the focus ring to focus the entire screen.
If the area around the lens axis is out of focus, fine-tune by turning
the distortion ring.
a
When using the short throw zoom lens ELPLU01, set Lens Type to
ELPLU01 from the Configuration menu so that keystone correction is
performed correctly.
s Extended - Operation - Lens Type

Adjusting the Image Position

Extend or retract the front foot to make adjustments. You can adjust the
position of the image by tilting the projector up to 10 degrees.
A
Extend the front foot.
B
Retract the front foot.
a
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.

Adjusting the Horizontal Tilt

Extend and retract the rear feet to adjust the projector's horizontal tilt.
27
p.86