Esc/Vp21 Commands; Command List; Cable Layouts - Epson EB-G6750WU User Manual

Monitoring and Controlling

ESC/VP21 Commands

You can control the projector from an external device using ESC/VP21.

Command list

When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
The main contents are listed below.
Item
On
Power ON/OFF
Off
Computer
Signal selection
BNC
HDMI
Video
S-Video
LAN
DisplayPort
HDBaseT (EB-G6750WU only)
Command
PWR ON
PWR OFF
Auto SOURCE 1F
RGB SOURCE 11
Component SOURCE 14
Auto SOURCE BF
RGB SOURCE B1
Component SOURCE B4
SOURCE 30
SOURCE 41
SOURCE 42
SOURCE 53
SOURCE 70
SOURCE 80
Item
A/V Mute On/Off On
Off
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
For more details, contact your local dealer or the nearest address provided
in the Epson Projector Contact List.
Epson Projector Contact List
s

Cable layouts

Serial connection
• Connector shape: D-Sub 9-pin (male)
150
Command
MUTE ON
MUTE OFF