Voicemail - AT&T Wireless Home Phone Base User Manual

Voicemail

Your Wireless Home Phone Base comes with standard wireless
voicemail. Follow the steps below to setup and use your voicemail.
Setup
Dial 1 on any home phone connected to the Wireless Home Phone
Base and wait four (4) seconds to connect to your AT&T wireless
voicemail. Simply follow the voice prompts to complete setup. To
enable remote voicemail retrieval and for added security be sure to
create a password during setup.
Message Waiting
There are two indicators for a new message waiting: 1) the voicemail
icon; and 2) an intermittent dial tone.
The voicemail icon on your Wireless Home Phone Base
flashes when a voicemail message is waiting. You will also hear an
intermittent dial tone on any connected phone handset before
placing a call.
Retrieving Messages
To retrieve voice messages, dial 1 on any home phone connected
to the Wireless Home Phone Base and wait four (4) seconds to
connect to your AT&T wireless voicemail box. Simply follow the
voice prompts to listen to and manage your messages. (Alternately,
you may dial your 10-digit home phone number to access your
voicemail box.)
Remote Retrieval
To retrieve voicemail messages from a phone not connected to the
Wireless Home Phone Base, dial the number associated with your
Wireless Home Phone Base service. When voicemail picks up, press
*. You will then be prompted to enter your password. Simply follow
the prompts to listen to and manage your voicemail messages.
Getting Started 9