Setting A "Blf List Key - Aastra 9133i User Manual

5 In the "Line" field, select a line
for which to apply this pro-
grammed key. Valid values are 1
through 9.
6 Click
changes.
7 Click on Operation->Reset.
8 In the "Restart Phone" field
click to restart the IP
phone.

Setting a "BLF List Key"

(For use with the BroadSoft
Broadworks Rel 13 or higher
platform only)
The BLF\List feature on the IP
phones is specifically designed to
support the BroadSoft Broadworks
Rel 13 Busy Lamp Field feature.
This feature allows the IP phone to
subscribe to a list of monitored
users defined through the
BroadWorks web portal.
Note: Your system administrator must
have BLF List enabled on the
BroadWorks Server. Contact
your system administrator for
more information.
In addition to monitoring the idle
and busy state, the BLF\List feature
also supports the ringing state. On
the 9133i phone, the LED lights
next to each BLF programmable
key illuminate steady to indicate
the monitored line is off-hook or
unregistered. The LED goes off
when the is idle. When the
monitored extension is ringing, the
LED flashes.
The Broadworks BLF feature is not
the same as the Broadworks
Shared Call Appearance (SCA)
feature and does not permit call
control over the monitored
extension.
to save your
Example
A receptionist has a 9133i running
Broadsoft firmware that subscribes
to a list of extensions from the
BroadWorks Application Server.
On the 9133i running Broadsoft
firmware, the programmable key
LEDs illuminate either flashing,
solid, or turn off depending on the
state of those extensions.
Note: Your system administrator can
also set BLF List using the config-
uration files.
From the Aastra Web UI:
1 Click onOperation->
Programmable Keys.
2 Select a "Hard Key 1" through
"Hard Key 7".
3 In the "Type" field, select
"BLF\List" (BroadSoft Broad-
Works).
Note: No value in the "Value" field is
required. The BroadWorks BLF
List name is configured in the
"BLF List URI" field instead.
4 In the "Line" field, select a line
number that is actively regis-
tered to the appropriate SIP
proxy you are using.
5 In the "BLF List URI" field, enter
the name of the BLF list defined
on the BroadSoft BroadWorks
Busy Lamp field page for your
particular user. For example,
my9133i-blf-list@as.broad-
works.com.
Note: Contact your system
administrator for the BLF List
URI.
6 Click
changes.
7 Click on Operation->Reset.
8 In the "Restart Phone" field
click to restart the IP
phone.
9133i IP Phone User Guide
to save your
13