About This Guide; Documentation; Introduction; Phone Features - Aastra 9133i User Manual

Sip ip phone release 1.3
Hide thumbs Also See for 9133i:
Table of Contents

Advertisement

About This Guide

— This guide explains how to
use your new 9133i phone.
Not all features listed are
available by default. Contact
your system administrator to
find out which features and
services are available on
your system. Your system
administrator also has the
ability to customize some
features on this phone.

Documentation

• Aastra 9133i IP Installation
Guide – installation and set-up
instructions, general features
and functions, and basic options
list customization. This guide is
included in the box with your
phone.
• Aastra SIP 9133i IP Phone User
Guide – explains the most
commonly used features and
functions. This guide can be
downloaded from
www.aastra.com.
• Aastra SIP 480i/480i CT/9112i/
9133i IP Phone Administration
Guide – explains how to set the
9133i phone up on the network
and contains advanced configu-
ration instructions for the 9133i.
This is an administrator level
guide. This guide can be down-
loaded from www.aastra.com.

Introduction

This 9133i IP telephone has all the
features of a regular business
phone, allowing you to make and
receive calls, transfer, conference
and more. The 9133i IP telephone
provides communications over an
IP Network using the SIP IP
telephony protocol.

Phone Features

• Three-line adjustable backlit
display screen
• 3 line/call appearance buttons
with corresponding lights
• 7 programmable buttons with
lights that can be programmed
with specific functions
• Full-duplex speakerphone for
handsfree calls
• Built-in-two-port, 10/100
Ethernet switch which lets you
share a connection with your
computer
• Inline power support, which
eliminates power adapters.

Requirements

• A SIP-based IP PBX system or
network installed and running
with a number created for the
new 9133i IP phone.
• Adherence to SIP standard
RFC 3261.
• Access to a configuration server
where you can store the firm-
ware image and configuration
files.
The configuration server must
be able to accept connections
anonymously.
• The IP phone must be config-
ured for a specific type of proto-
col to use. (TFTP is enabled by
default). You can configure the
following protocols on the IP
phone:
9133i IP Phone User Guide
1

Advertisement

Table of Contents
loading

Table of Contents