Group Functions; Activating/Deactivating Group Calls - Siemens HiPath 3000 User Manual

Step by Step
> <
Leave hunt group?
> <
Join hunt group?

Group functions

Activating/deactivating group calls

If this has been configured by the service engineer, you
belong to one or more groups of internal users who can
be reached by means of a hunt group or group call pho-
ne number. Calls are signaled on all telephones in the
group either in succession (=hunt group) or simultane-
ously (=group call), until a member of the group ans-
wers the call. Every user in the group can also remain
available under his own phone number.
You can leave and re-join specific groups or leave and re-
join all groups.
These functions can also be called directly by entering
the relevant code
You belong to a hunt group or group call group
Use this function to leave or re-join the hunt group or
group.
c or d Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
either:
[
Select the menu item and confirm. You have now left
the hunt group or group.
or:
[
Select the menu item and confirm. You have now re-joi-
ned the hunt group or group.
then:
a Press the on-hook key several times to end the operati-
on.
Page 132 Page 132.
Group functions
93