Bottom Housing - Honeywell CK75 Repair Manual

TITLE
CK75 Repair Manual
Installation
1.
Prior to installing make sure no metal objects are stuck to the magnet located in the door assembly.
2.
Place the door assembly into the back housing and tighten the two screws with 3.5 +/-0.2 in-lbs of torque.
3.
If this is a new door you will also need to re-apply the appropriate print on demand label that is located on the door. See
the labeling operation.
4.
Reinstall the handstrap.

Bottom Housing

OPERATION:
The bottom housing will need to be removed to access internal assemblies or if it needs to be replaced. The bottom housing
is secured with 10 screws.
NOTE Delta Airlines units with scanner option 'L' use a bottom housing released specifically for this configuration. The
docking connector in the Delta bottom housing has a higher corrosion resistant plating on the contacts. When repairing
Delta Airlines units use the correct bottom housing.
Tools Required
Description
T10 Torx driver
T7 Torx driver
Parts Required
Item Part Number
1 8754-870900-28
1 8754-870900-29
8754-870900-30
1
1 8754-870900-31
1 8754-870900-01
8754-870900-02
1
NOTE A new bottom housing will not have any labeling on it
Description
HSG,BOT,POTTED C2,EX25,STD,CAM,CK75
HSG,BOT,POTTED C2,EX25,STD,N CAM,CK75
HSG,BOT,POTTED C2,EA30,STD,CAM,CK75
HSG,BOT,POTTED C2,EA30,STD,N CAM,CK75
HOUSING,BOT,ASSY POTTED C2,EX25,CS,CK75
HOUSING,BOT,ASSY POTTED C2,EA30,CK75
Model DOCUMENT NO.
CK75
L3-GLBL-RPR-4254
Part Number
PAGE
Page 14 of 42
(Rev A)
Qty
1
1
1
1
1
1