Clutch; Ignition System - Husqvarna 371K Workshop Manual Supplement

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
6
– English

CLUTCH

Self-lubricating clutch bearing
The clutch bearing fitted to the 371K and 3120K Air Injection is lubricated automati-
cally, which is an old Husqvarna speciality. A channel through the crankshaft has a
vent under the clutch bearing. The positive pressure that is developed inside the
crankcase is transferred to the clutch bearing. This prevents external dust particles
from getting inside the bearing and lubricates the bearing at the same time.
NOTE!
The channel must be plugged before pressure-testing the crankcase.

IGNITION SYSTEM

The ignition system is fully sealed and has no moving parts. It is resistant to damp
and dirt. It is designed so that there is no need to adjust the timing.
The Husqvarna 371K and 3120K Air Injection have a rev limiter built into the
electronic unit which limits engine revs to 9,750 rpm.
www.mymowerparts.com