Husqvarna 371K Workshop Manual Supplement page 8

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
CUTTING HEAD
Reversible arm
The cutting arm can be reversed on the machine. This makes it possible to cut right
up against a wall or floor as close as the disc guard allows, i.e. around 20 mm from
the cutting disc.
Naturally some of ergonomic benefits of the machine are sacrificed by reversing the
cutting arm, but for certain jobs the ability to reverse the arm can be essential in
order to do the job.
8
– English
www.mymowerparts.com