Assembly - Char-Broil 463240613 Product Manual

LP CYLINDER IS SOLD SEPARATELY. Fill and leak check the cylinder before attaching to grill and regulator (see Use &
11
section). Once cylinder has been filled and leak checked, place cylinder into hole in bottom shelf. Make sure cylinder valve
is facing front of grill. Secure cylinder with cylinder screw under bottom shelf.
See Use & Care section of this manual to perform the burner Flame Check and for
Cylinder screw at rear of cart
Always keep LP cylinders in upright position during
use, transport and storage.
CAUTION
Cylinder valve must face to front of cart once
tank is attached. Failure to install cylinder
correctly may allow gas hose to be damaged
in operation, resulting in the risk of fire.
12
OPTIONAL
1. Remove the RH side shelf and brackets from your Grill:
3. Attach the Griddle Cart to you Grill.
20
Cylinder screw
Regulator
Attaching the Griddle Cart to your full size Commercial Series grill.
2. Attach the magnet assemblies to your grill:
important safety instructions before using.
LP Cylinder
(not included)
4. Complete!
b
a
2a. From outside the grill, insert the magnet shaft.
. 2b. From inside the grill, place the spring on the shaft,
. followed by the washer.
2c. Secure the magnet assembly with the hairpin clip.
Care
c