Char-Broil 463240613 Product Manual page 22

Pull the Burner Control Knob off of Valve Stem.
4
Remove Screws and Washers that secure the Bezel to the Control Panel. Save removed Bezel for converting back to LP
Tank Gas.
Install new Natural Gas Bezel provided with Kit (see illustration below) in place of old Bezel, on Control Panel and secure
using previously removed Screws and Washers. Assure proper alignment with Control Knob before fully tightening.
Note: The new bezel will limit the rotation of the Control Knob in order to properly control gas flow to your grill.
Press Control Knob back onto Valve Stem. Make adjustments to Bezel for free movement of Control Knob.
Under the firebox, attach the orifice holder with the venturi tube with the screws previous removed.
5
22
Bezels
Screws
Correct engagement
Main Burner
Control Knobs
NOTE: Reinstall Screws
Install bezel with "OFF" at top