Web Control Function - Denon CEOL RCD-N8 Owner's Manual

Web control function

You can control this unit from a web control screen on a web browser.
• This unit and the PC need to be connected to the network properly
(vpage 9 "Connecting to a home network (LAN)") in order to
use the web control function.
• Depending on the settings of your security-related software, you
may not be able to access this unit from your PC. If this is the case,
then change the settings of the security-related software.
1
Switch the "Network Control" setting to "On"
(vpage 20).
2
Check the IP address of this unit with "Network
Information".
[Network information ]
IP Address
192.168.100.19
Checking the IP address.
3
Start up the web browser.
4
Enter the IP address of this unit in browser's address
box.
For example, if the IP address of this unit is "192.168.100.19",
enter "http://192.168.100.19/".
http://ceol.local./index.asp
w Bonjour apple Yahoo! Japan YouTube Wikipedia news(45)
Please select the menu.
NETWORK
FIRMWARE
q Entering the IP address.
• By adding this unit's IP address to the browser's bookmark, you
can display the web control screen using the bookmark function
the next time you use the browser. If you are using a DHCP
server and "Network Control" (vpage
turning the power on/off changes the IP address.
w If you are using the Safari web browser, you can select "Bonjour"
and directly access the unit's web control screen from the
overview section.
46
5
When the top menu is displayed, click on the menu
item you want to operate.
e
NETWORK
FIRMWARE
r
q
e Click when you setup network settings. vGExample 1H
r Click when you update firmware (vpage 15)
20)) is set to "Off",
Please select the menu.
v See overleaf