Denon RCD-M39 - CD RECEIVER Manual

Before You Begin

What's In the Box

Remote control unit	R03/AAA batteries	Power cord
CD Receiver
Safety Instructions	Getting Started	Owner's Manual	Service network list

Required for setup

Speaker

Speaker cables

Note that the illustrations in this manual is for explanation purposes and may differ from the actual unit.

Setup Steps

There are five steps to the setup process.

1. Install batteries in the remote control unit
2. Connect the speakers
3. Connect the power cable
4. Turn the power on
5. Begin CD playback

Install batteries in the remote control unit

Connect the speakers

Connecting the speaker cables

1. Peel off about 10 mm of sheathing from the tip, then twist the wire core.
   
2. Loosen the speaker terminal.
   
3. Insert the speaker cable into the speaker terminal.
   
4. Tighten the speaker terminal.
   

Connect the power cable

To household power outlet (AC 230 V, 50/60 Hz)

Turn the power on

Begin CD playback

1. Set the input source to "CD".
2. Insert a disc.
   
3. Press .
4. Adjust the volume.

www.denon.com

If you have setup problems:
If you need additional help in solving problems, contact DENON customer service in your area.
See the address sheet included in the box.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Denon RCD-M39 - CD RECEIVER Manual