Denon CEOL RCD-N8 Owner's Manual page 50

6
Operate.
GExample 1H Network Setting 1
NETWORK
NETWORK
t
FIRMWARE
Friendly Name
CEOL Set Set Default
Network Connection
Select Connection Select Connection
[+]DHCO or Proxy
i
Test Connection
Friendly Name setting
t To change the Friendly Name, enter the new name in the text box
and click "Set".
y To reset the Friendly Name, click "Set Default".
Network connection settings
u Click to change the network connection method. If you select
"Wi-Fi", a new item will appear on-screen.
(vGExample 2H)
i Click to change DHCP/proxy settings.
(vGExample 2H)
o Click to connect using the newly applied settings.
NOTE
To apply network connection settings, click "Test Connection" after
making changes.
7
Operate.
GExample 2H Network Setting 2
NETWORK
FIRMWARE
Friendly Name
y
CEOL
Network Connection
u
Select Connection
Wi-Fi Setup
Manual
S SID
o
Security
Security Key
Defaullt Key
[-]DHCP or Proxy
DHCP
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Proxy
Address Or Name
Address
Port
Network connection settings
Q0 Various items will be displayed if you selected "Wi-Fi" in
Example 1. Select or input items as necessary, and then click
"Test Connection" to apply the changes.
NOTE
• Items displayed may vary depending on selected items and
connection status.
• After selecting each item, wait a moment for the display to be
updated.
Q1 Displayed if "DHCP" or "Proxy" is selected in Example 1. When
changing DHCP/proxy settings, input or select for each item.
NOTE
To apply network connection settings, click "Test Connection" after
making changes.
Web control function
NETWORK
Set Set Default
Wi-Fi
Manual
DENON
None
Q0
Key1
ON OFF
192.168.000.001
255.255.255.000
000.000.000.000
000.000.000.000
000.000.000.000 Q1
ON OFF
Address Name
000.000.000.000
00000
Test Connection
47