KitchenAid 720-0709C Manual page 13

5. Attach the top of the side shelf to the grill firebox
by inserting three screws into the side shelf
from inside the grill firebox and tighten. See (A) below.
6. Attach the bottom of the side shelf to the side panel of
the grill by tightening the two screws inserted in the
keyhole slots in Step 3. See (B) below.
7. Attach the side shelf to the control panel by inserting
screw which was removed from step 3 and tighten,
see (C) below.
A
C
Attach Left Side Shelf
1. Unpack left side shelf (B).
2. Loosen but do not remove the 2 screws on the side
panel (A). Remove the 3 screws on the side panel (B).
Remove the screw on main control panel (C).
B
A
B
C
3. Align the bottom keyhole slots on the side shelf with
the loosened screws. Hook the side shelf onto the two
loosened screws and let the shelf slide down so the
screws are in the narrow neck of the slots.
IMPORTANT: This step is meant to help with the
installation, but do not depend solely on the two
screws to hold the weight of the side
shelf.
4. Attach the top of the side shelf to the searing side burner
side by inserting three screws from side shelf side and
tighten. See (B) below.
5. Attach the bottom of the side shelf to the side panel of
the grill by tightening the two screws inserted in the
keyhole slots in Step 2. See (A) below.
6. Attach the side shelf to the control panel by
inserting the screw which was removed from step 3
and tighten. See (C) below.
A
B
C
13