Timer Program Extension; To Correct An Automatic Timer Program; To Stop A Started Automatic Timer Program - Hitachi VT-MX4410A Owner's Manual

TIMER PROGRAM EXTENSION

TIMER PROGRAM EXTENSION
To shift the time schedule of a One Time Program.
1) Turn the power on. Then, press the MENU button.
2) Select the program number which you want to shift forward using the PLAY/
STOP/ button. The details of the selected program appears on the TV screen.
3) Press the REC button on the remote control when a program number is blinking.
Each additional push will shift forward the start/end time for recording by 10 minutes. It
can be shift forward for up to 24 hours.
When the recording is already in progress, each additional push will shift forward the
end time for recording by 10 minutes. It can shift forward up to 23:50 from the start time.
In this case, the recording speed will automatically be set to SLP mode.
If you want to cancel while the setting, press the PAUSE button on the remote control.
The recording time returns to the original time.
4) Press the RESET/EXIT button to exit the setting menu.
NOTES:
• You can shift the time schedule of a One Time Program only.
• When you press the PAUSE button to cancel the setting while the recording is already
in progress, the recording speed will stay in SLP mode.

TO CORRECT AN AUTOMATIC TIMER PROGRAM

1) Turn the power on.
2) Repeat steps [1] to [3] on page 24.
3) Go to the digit you want to change by using the F.FWD/
4) Enter correct numbers by using the PLAY/
5) Press the RESET/EXIT button to return to original mode.
6) Press the POWER button to return to timer stand-by mode.

TO STOP A STARTED AUTOMATIC TIMER PROGRAM

Press the STOP/EJECT button on the VCR.
button or REW/
or STOP/ button.
or
button.
60