To Correct An Automatic Timer Program - Hitachi VT-MX211A Owner's Manual

TIMER RECORDING
7 Set the end time
First, press CH/SET
(Example: 08)
Next, enter a minute. (Example: 30)
Then, press CH/SET
8 Set the channel number
Press CH/SET
(Example: 16)
9 Set the tape speed
Press CH/SET
(Example: SP)
10 Exit the program mode
Press MENU button. Program 1 is now completed.
To set another program, repeat steps [1] to [10].
11 Set the timer
Press POWER button. This turns the VCR power off, and the "
the display. The number of all programmed events are displayed with current time.

TO CORRECT AN AUTOMATIC TIMER PROGRAM

or button repeatedly until your desired hour appears.
or button to point to AM or PM. (Example: PM)
or button repeatedly until your desired channel number appears.
or button repeatedly until your desired tape speed appears.
" indicator lights up on
45