Slow Motion; Counter Memory - Hitachi VT-MX4410A Owner's Manual

PLAYBACK

SLOW MOTION

Press the SLOW button to reduce the playback speed. The VCR mutes the sound
during slow motion. You can control the speed by pressing the F.FWD button (faster) or
the REW button (slower).
Press the PLAY button to return to normal playback.
NOTE: If it is left in the Slow mode for more than five minutes, the VCR will automatically
switch to the Stop mode.

COUNTER MEMORY

Use this feature to memorize the beginning point that you want to return to. And you can
search it easily by rewinding or fast forwarding.
• Use the remote control for this procedure.
• Be sure to check that the POWER and the VCR/TV indicators are both on.
• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the
back of the VCR to match the channel selected on the TV.
• This feature only works with a prerecorded tape.
1 Stop the tape at your desired point
Insert a prerecorded tape. Rewind or fast forward the tape to the beginning point at
which you want to mark.
2 Reset the counter to 0:00:00
Press the COUNTER RESET button on the remote control. If necessary press the
COUNTER RESET button again to reset the counter to 0:00:00.
3 Select the Counter Memory mode
Press the COUNTER MEMORY button on the remote control until "M" appears on the
TV screen.
• The COUNTER MEMORY button does not function if the Auto Repeat mode is set to
[ON]. In this case, set the Auto Repeat mode to [OFF].
M 0:00:00
39