Recording; Viewing And Recording The Same Program - Hitachi VT-MX4410A Owner's Manual

RECORDING

RECORDING
• Please refer to the connection you are using, through pages 10,11, or 12 on
"ANTENNA/CABLE CONNECTIONS" before continuing.
• Be sure to check that the POWER and the VCR/TV indicators are both on.
• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the
back of the VCR to match the channel selected on the TV.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or
fast forward the tape to the point at which you want to begin recording.)

VIEWING AND RECORDING THE SAME PROGRAM

1 Select the channel to be recorded
Press the number buttons on the remote control or the CHANNEL(CH)
NOTE: If you have a cable box or satellite box connected to this VCR, please refer
to "ANTENNA/CABLE CONNECTIONS" on pages 11 and 12 before proceeding to
the next step.
2 Select the tape speed
Press TAPE SPEED button on the remote control to select the desired tape speed
(SP/LP/SLP).
SP
3 Begin recording
Press the REC button. The REC indicator on the VCR comes on.
REC
CH 32
or button.
48