Hitachi VT-MX4410A Owner's Manual page 16

OPERATING CONTROLS AND FUNCTIONS
forward during playback. (Forward Search)
button- When setting program (For example: setting clock or timer program), press to
determine your selection and proceed to the next step you want to input. Press to
determine the setting modes from the on screen menu. Press to add or delete channel
numbers during channel preset. (only on the remote control)
6. POWER button- Press to turn VCR on and off. Press to activate timer recording.
7. Remote sensor window- Receives the infrared signals from the remote control.
8. Indicators-
POWER indicator- Indicates that the power is turned on.
VCR/TV indicator- Indicates that the VCR is in the VCR position.
TAPE IN indicator- Indicates that there is a tape in the VCR.
TIMER indicator- Indicates that it is recording. Flashes when a recording has
been paused.
REC indicator- Indicates that it is recording. Flashes when a recording has been
paused.
9. CHANNEL(CH)
recording.
Tracking function- Press to minimize video 'noise' (lines or dots on screen) during
playback (only on the VCR) or slow mode.
Press to stabilize the picture in the Still mode when the picture begins to vibrate
vertically.
10. REC button- Press to begin manual recording.
IRT button- Press to activate Instant Recording Timer. (only on the VCR)
–REAR VIEW–
11. NUMBER buttons- Press to select desired channels for viewing or recording. To
select channels from 1 to 9, first press "0" button then 1 to 9 (only on the remote control)
+100 button- When selecting cable channels which are higher than 99, press this
button first, then press the last two digits. (To select channel 125, first press "+100"
button then press "2" and "5"). (only on the remote control)
12. MENU button- Press to display the main menu on the TV screen. Press to exit the
menu on the TV screen. (only on the remote control)
13. DISPLAY button- Press to display the counter or the current channel number and
the current time on the TV screen. (only on the remote control)
14. TAPE SPEED button- Press to set desired recording speed : SP/SLP.(only on the
/ buttons- Press to select the desired channels for viewing or
16