Hints For Timer Recording; To Check The Automatic Timer Program - Hitachi VT-FX6500A Owner's Manual

ONE TIME PROGRAM
PROGRAM NUMBER
DATE
START TIME
END TIME
CHANNEL
REC SPEED
10 Set the tape speed
Press the PLAY/ or STOP/
ONE TIME PROGRAM
PROGRAM NUMBER
DATE
START TIME
END TIME
CHANNEL
REC SPEED
11 Finish setting the program
Press the F.FWD/ button. Program 1 is now completed.
• To set another program, repeat steps [2] to [11].
• Press the RESET/EXIT button to return to original mode.
12 Set the timer
Press the POWER button to turn off. The "
• Please see "HINTS FOR TIMER RECORDING" for more information.

HINTS FOR TIMER RECORDING

• If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock setting and all
timer settings will be lost.
• If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape
and the VCR power will be turned off. The "
• If a tape is not in the VCR or does not have the erase-protection tab, the "
recording cannot be performed. Please insert a recordable tape.
• The TV that is connected to your VCR may be turned ON or OFF when the VCR is in the timer-record
mode.

TO CHECK THE AUTOMATIC TIMER PROGRAM.

1) Turn the power on.
2) Press the MENU button. The details of the your program appear on the TV screen.
1
3
5
• If the program you wish to check is not on the screen, press the PLAY/
desired program appears.
3) Press the RESET/EXIT button to return to original mode.
4) Press the POWER button to return to timer stand-by mode.
1
05/04 THU
07: 30 PM
08: 30 PM
16
--
button until the desired tape speed appears. (Example: SP)
1
05/04 THU
07: 30 PM
08: 30 PM
16
SP
SP
SLP
" indicator on the display comes on.
" indicator will flash.
TIMER PROGRAMMING
DATE STA/END
05/04 07:30 PM
THU 08:30 PM
05/11 10:00 PM
W THU 10:54 PM
05/21 11:00 PM
DAILY 11:30 PM
38
" indicator flashes and timer
CH
16
SP
125
SLP
40
SLP
or STOP/ button until your