Hitachi VT-MX4410A Owner's Manual page 30

SET UP FOR USE
• Use the remote control for this procedure.
• When the VCR in the Menu mode, the following buttons only work (PLAY/
F.FWD/ , REW/ , STOP/
• Be sure to check that the POWER and the VCR/TV indicators are both on.
• Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the
back of the VCR to match the channel selected on the TV.
1 Select "SETTING CLOCK"
Press the MENU button. The SETTING CLOCK menu appears.
• The number buttons on the remote control do not work in this menu mode.
• When you press F.FWD/
next step.
• Press the REW/
[7].
2 Select the month
Press the PLAY/
(Example: March  0 3)
Then, the press F.FWD/
, RESET/EXIT , POWER AND MENU).
SETTING CLOCK
MONTH DAY
- - / - - - - - -
HOUR MINUTE
- - : - -
button during steps [2] to [6], you may move forward to the
button to go back one step from the current step during steps [3] to
or STOP/ button repeatedly until the desired month appears.
button.
SETTING CLOCK
MONTH DAY
03 / - - - - - -
HOUR MINUTE AM/PM
- - : - - - -
YEAR
AM/PM
_ _
YEAR
,
30