Searching For A Tape Position With Picture (Scanning); Still Picture / Slow Motion; Searching For Tape Position Without Picture (Forward Wind And Rewind); Easy View - Hitachi VTFX140EUKN Operating Instructions Manual

will be rewound to 1 minute and 20 seconds before
'0:00:00').
'-:--' is displayed in the 'REMAIN' counter
* This counter will automatically recognise the length of the
tape. In addition, when you put in a cassette the video
recorder must first calculate the time played. Therefore, '-:--'
appears first and only after the tape has been running for a
few seconds will the correct playing time be shown.
Searching for a tape position with
picture (scanning)
1 While a cassette is playing, press
I (forward) one or more times. This will, for example,
appear in the display:
2 To stop at a certain place on the tape, press
Decreased picture quality
Scanning interferes with the picture quality. The sound is
switched off. This is not a fault in your machine.

Still picture / slow motion

1 During playback, press
display a still picture. This will, for example, appear in the
display:
2 Each time you press
STILL R
advance one frame.
3 When you hold down the
will be played in slow motion.
4 When you press
I
several times, you have a choice
of several playback speeds for slow motion.
5 To continue playback, press
H
(reverse) or
0:30:
21
G .
STILL R
to stop the tape and
0:00:
02
, the picture will
STILL R
button, the tape
G .
Searching for tape position without
picture (forward wind and rewind)
1 Stop the tape with
h
2 Press
H
(reverse) or
example, appear in the display:
3 To stop at a certain place on the tape, press

Easy View

With this function you can switch to picture search during wind
and rewind.
1 If you hold
H
(rewind) or
rewind, you will switch to picture search.
2 As soon as you release the button, the video recorder will
automatically switch back to rewind or wind.
.
I
(forward). This will, for
0:30:
21
h
.
I
(wind) during wind or
15