Using Your Phone; Pre-Dialling; Handset Speakerphone - AEG ECLIPSE 10 User Manual

8.

USING YOUR PHONE

8.1 Make a Call
8.1.1

Pre-dialling

Enter the phone number (maximum 24 digits). If you make a mistake, press
entered number.
Press to dial the phone number.
8.1.2 Direct Dialling
Press on your Handset.
Dial the number.
8.1.3 Call from the Redial List
Press in standby mode.
>The last number dialled is displayed.
Press to select the desired entry in the redial list and then press to dial out the selected redial
number.
8.1.4 Call from the Call Log
Press in standby mode.
Press to select the desired entry in the call log and then press to dial out the selected call log
number.
Note: You need to subscribe to Caller Line Identification service to be able to see the caller's number or
name in the call log.
8.1.5 Call from the Phonebook
Press in standby mode.
Press to select the desired entry in the phonebook and then press
phonebook number.
8.2 Answer and End a Call
When the phone rings, press on your handset.
To end a conversation, press
Warning: When the handset is ringing, please do not hold it too close to your ear as the volume of the
ringing tone may damage your hearing.
Note: You can simply place the handset back on its base station to end the call, provided you have not
deactivated the Auto hang-up feature.
8.3

Handset Speakerphone

During a call, you can press to alternate between hands-free speakerphone and handset earpiece.
on your handset.
to delete the last
to dial out the selected