AEG ECLIPSE 10 User Manual page 7

7.2 Display Icons and Symbols on the handset (See P2)
Icon
Displays when the battery is fully charged.
Internal segments cycle while charging.
Displays when the line is in use.
Flashes when there is an incoming call.
Flashes when you have a new voicemail message. (This is a network service)
Displays when you have new missed calls, or the call log is being viewed.*
Displays when the phonebook is accessed.
Displays when the alarm is set.
Displays when handset ringer is turned off.
Displays when the handset is registered and within range of the base station.
Blinks when the handset is out of range or is searching for a base.
Displays when the answering machine is on.
Flashes slowly when there are new answering machine message(s) or when the answering
machine memory is full.
Turns on when confirmation of selection or programming is available.
Turns on during phonebook editing mode to delete the last digit.
Turns on during menu mode when you can return to the previous state or previous step.
Turns on when the screen display is on.
*You must subscribe to Voicemail service or Caller ID from your network providers for this feature to work.
You may need to pay a subscription fee.
7.3 Base Unit (See P3)
# Icon
Lights up in Green when the answering machine is on. Flashes if there are new messages.
12
Flashes rapidly if the answering machine memory is full.
Lights up in Red when a handset is on the base to indicate it is charging.
13
Press to find/page all registered handsets. Press the button again, or any key on the handset
14
to turn off the page signal. Press and hold to start registration process.
Meaning
Meaning