Clock And Alarm Settings - AEG ECLIPSE 10 User Manual

11.3.3 Edit a Redial Number
"EDIT ENTRY"
>A confirmation tone is played.
11.3.4 Delete a Redial Number
From the home screen, press
Press to select an entry and then press
Press to "DELETE" and then press
>"CONFIRM?" is displayed.
Press again to confirm.
>A confirmation tone is played.
Press to return to standby mode.
11.3.5 Delete All Entries from the Redial List
From the home screen, press
Press .
Press to "DELETE ALL" and then press
>"CONFIRM?" is displayed.
Press again to confirm.
>A confirmation tone played.
12.

CLOCK AND ALARM SETTINGS

12.1 Date and Time Settings
If you have subscribed to the Calling Line Identification service, the time and date settings will be
automatically updated by the network when you receive an incoming call, but you may still need to set
the correct year.
You can also set the date and time manually.
From the home screen, press
Press to "CLOCK&ALARM" and the press
Press again to select "DATE & TIME".
>The last stored date is displayed, with the third digit of the year flashing.
Enter the current date and press
>Enter 03 May 2012 as [1], [2], [0], [5], [0], [3].
>If you make a mistake, press
Enter the current time and press
format, see Change the Date Format on page 51.)
>For 24-hour format, enter 1:30pm as [1], [3], [3], [0].
>For 12-hour format, enter the time and then press + to select am , or press- to select pm.
>If you make a mistake, press
>A confirmation tone is played.
Press to return to standby mode.
.
.
.
.
to select.
.
to select.
.
to confirm.
to delete the last digit entered.
to confirm. The default time format is 24 HOURS. (To change time
to delete the last digit entered.
to select.