Programming The Vcr Remote To Control Your Tv - Hitachi VT-FX614A Owner's Manual

PROGRAMMING THE VCR REMOTE TO CONTROL YOUR TV

PROGRAMMING THE VCR REMOTE TO CONTROL YOUR TV
The VCR remote control can be programmed to control many TV brands that are remote controlled.
1 Turn on the TV.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
2 Point VCR remote control toward TV.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3 Press and hold the "TV" button.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 Press the remote button corresponding to your TV brand as shown in the set-up chart. The TV channel
will change to confirm that the remote control has been set.
TV Brand Press "TV" and this
remote button
Hitachi
Zenith
Sony
Magnavox
Sanyo
Note: If your TV brand is not listed on the Set-Up Chart, try all the buttons listed in the chart until the TV changes
channels. If the TV channel does not change, you won't be able to program the remote for your TV.
•
Using the VCR remote to control your TV
1 Press the "TV" button on remote control.
TV Brand
1 Gold star 1
2 Toshiba
3 Gold star 2
4 Panasonic 2
5 RCA
Press "TV" and this TV Brand
remote button
6 Panasonic 1
7 Mitsubishi
8
9
0
Press "TV" and this
remote button
CH
CH
JVC 100/ENT
Sharp 1 LAST CH
Sharp 2 DISPLAY
- 67 -