Hitachi VT-FX614A Owner's Manual page 59

DELAYED RECORDING - 59 -
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
12 Press the POWER button to turn off the VCR.
The delayed recording indicator will display on the VCR.
This tells you that the VCR will automatically record at the times and dates you have programmed.
• If you are using a cable box, you must select the channel you want to record on the cable box (in this case 08);
and turn on the cable box.
Note: You can correct any item entered as long as you go by pressing the CLEAR button repeatedly until the digit
to be corrected changes to white dash "-" on the screen. Then enter the correct number. Illogical times and
dates won't be accepted.
To stop recording while in the timed recording mode:
(1) Press POWER button.
(2) Press the STOP button within 10 seconds.
• This can be done either on the VCR or with the remote control.
When you have set up all the timed recordings you want:
• Don't forget to load a videocassette (with the safety tab still attached) to record on.
• If using a cable box the VCR can control, turn on the cable box before the time the recording is to begin.
• If using a cable box the VCR cannot control, turn on the cable box and tune it to the channel you want to record
before the time the recording is to begin.