Choosing A Mode For Audio Playback - Hitachi VT-FX614A Owner's Manual

SPECIAL PLAYBACK EFFECTS - 44 -
Visual Search
This function let you search backward and forward through the videotape while viewing it.
Remote Control Illustration.
During play:
Press the REW button to search in reverse.
Press the F.FWD button to search ahead.
• Press the PLAY button to return to normal playback.
Press REW or F.FWD and hold it; you can search backward or forward through the tape at a higher speed
while viewing it.
• Press PLAY and REW, then hold REW for backward search at a higher speed.
• Press PLAY and F.FWD, then hold F.FWD for forward search at a higher speed.
• Release REW or F.FWD to return to normal playback.
•

Choosing a mode for audio playback

The VCR records the same audio on both the Hi-Fi and linear tracks on the tape. The Hi-Fi sound is recorded on
separate left and right stereo channels. Monaural sound is recorded on the linear track.
To enjoy Hi-Fi sound, connect your VCR to a stereo television or amplifier/receiver using the audio/video jacks
(see page 54).
How to select playback audio
1 Press the GUIDE button.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
2 Press the (2) button to select the VCR SETUP operation.
Remote Control Illustration.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3 Press the (4) button to select "HIFI" or "LINEAR".
• Select Hi-Fi to playback sound recorded on the Hi-Fi track and for normal use.
The L and R indicators will light in the VCR's display panel.
• Select LINEAR to play back the sound recorded on the linear monaural track. Also, if the audio sounds distorted
or unusual or there is no audio, select LINEAR.