Table of Contents
Advertisement
PROGRAMMING THE VCR REMOTE TO CONTROL YOUR TV
PROGRAMMING THE VCR REMOTE TO CONTROL YOUR TV
The VCR remote control can be programmed to control many TV brands that are remote controlled.
1 Turn on the TV.
2 Point VCR remote control toward TV.
3 Press and hold the "TV" button.
4 Press the remote button corresponding to your TV brand as shown in the set-up chart. The TV channel
will change to confirm that the remote control has been set.
TV Brand
Press "TV"
and this
remote button
Hitachi
1
Zenith
2
Sony
3
Magnavox
4
Note: If your TV brand is not listed on the Set-Up Chart, try all the buttons listed in the chart until the TV changes
channels. If the TV channel does not change, you won't be able to program the remote for your TV.
Using the VCR remote to control your TV
1 Press the "TV" button on remote control.
2 Point VCR remote control toward TV.
3 Press buttons corresponding to the functions available on your TV remote control.
TV Brand
Press "TV"
and this
remote button
Sanyo
5
Goldstar 1
6
Toshiba
7
Goldstar 2
8
TV Brand
Press "TV"
and this
remote button
Panasonic 2
9
RCA
0
Panasonic 1
CH
Mitsubishi
CH
- 70 -
TV Brand
Press "TV"
and this
remote button
JVC
100/ENT
Sharp 1
VOL
Sharp 2
DISPLAY
Hitachi 2
DISPLAY
Advertisement
Table of Contents
