Remote Control Of The Tv; Programming The Remote Control Of The Tv - Hitachi VT-MX4530A Owner's Manual

REMOTE CONTROL OF THE TV

PROGRAMMING THE REMOTE CONTROL OF THE TV

1 Turn on the TV
Turn on the TV (any channel is okay).
2 Program the remote control
Aim the VCR's remtoe control at your TV set. Hold down the TV button (not the VCR/TV button) while
you press the number corresponding to your brand of television as shown in the chart.
For example;
If you have an RCA television, press the TV and 0 at the same time. If this button combination sends a
signal that matches with your TV, the channel will change on the TV, and you'll know the remote is set to
control the television.
NOTES:
• If that button combination does not change the TV channel, go through the whole list of button
combinations one by one until you find one that does change your TV channel.
• Also, if your brand of TV is not listed in the chart, try all the number buttons. One of them may work for
you.
• If the TV channel still doesn't change after going through all the button combinations listed, it is likely
that you will not be able to program this remote control for your TV.
TV Brands Press the TV and This Number
Hitachi 1
Zenith 2
Sony 3
Magnavox 4
Sanyo 5
Gold Star 6
Toshiba 7
Funai 8
Panasonic 2 9
RCA 0
Panasonic 1 CH (
up arrow)
Mitsubishi CH (
down arrow)
JVC +100/ENTER
Sharp 1 MEMORY
Sharp 2 DISPLAY