English
Hood Installation
1. Lift the hood into position and guide the electrical cable through the electrical
cable clamp on the hood.
2. Insert the 4 wood screws from the bottom and securely fasten.
3. Secure the electrical cable in the cable clamp while allowing sufficient length
in the hood to connect the field wires to the hood wires.
4. Make the electrical connections using screw-on wire connectors. Connect the
black wires together then the white wires, followed by the green or bare wire
to the green grounding screw in the hood. Replace the bottom cover.
Caution! All wiring installation must comply with local and national electrical
code regulations.
5. Attach ductwork and use Hi-Temp duct tape to seal all joints.
6. After turning all range hood switches to the OFF position, turn the power ON
and test your unit.
9